AL102Transformer Winding Deformation (SFRA) Tester
Specifications
| 测试主机与PC接口 | USB接口 |
|---|---|
| Signal source | 自带扫频的激励信号，信号输出Vpp为16V，输出阻抗为50Ω，输出频率范围：10Hz-10MHz |
| 两个采集通道高速同步采样通道，每通道最高采样率为100Msps | |
| Input impedance of acquisition channel | 1MΩ/50Ω |
| Sweep Measuring Range | 10Hz－10MHz |
| Scan interval | 小于1kHz |
| Scan mode | 采用线形或者对数分布的扫频测量方式 |
| Scan frequency accuracy | 信号源输出信号的频率精度优于0.01% |
| Sweep Measurement Frequency Point | 10Hz－10MHz，测量点数5000点 |
| Measuring range | -100dB～20dB |
| Accuracy | ±0.5dB（-100dB～20dB） |
| Power supply | AC220V±10%(50Hz) |
Values are reproduced as supplied by the factory. An English datasheet is available on request.