产品导航

1.变压器测试类
2.耐压试验设备
3.计量测试设备
4.线路测试设备
5.二次回路设备
6.轨道机电检测
7.油气检测仪器
8.环境监测仪器
9.光电测试设备

联系方式


武汉艾尔通电气有限公司

销售热线:
   0159 2760 1691
   手机微信同号

技术支持:
   0137 2018 1564
   手机微信同号

Q Q:
   343992968
邮箱地址:
   343992968@qq.com

产品中心

AL506 全自动开关特性测试仪 Circuit Breaker Tester

[艾尔电气  全自动开关特性测试仪  执行标准]

 

DL/T 846.3-2004

 

[艾尔电气  全自动开关特性测试仪  产品简介] 

 

本仪器采用嵌入式系统,集成了测量、显示与分析单元于一体,结构简单,性能可靠。采用了超声波相位测量原理的位移测试方法。新型位移传感器有极其优异的真线性,能够可靠地分辨0.08mm的位移,而且安装方便,易于使用。传统的滑线电阻测量位移作为选件,仍然可供选用。

 

[艾尔电气  全自动开关特性测试仪  产品特征]   

 

1、录波功能:专业分析显示软件,记录显示各种波形和曲线,可存数据200次。

2、重合闸控制功能:设计有开关重合闸试验功能,各种重合闸试验均可随心所欲;

3、速度测试传感器:超声波测速传感器,现场安装极为简便;

4、微机操作方式:内置一体化鼠标、软件键盘完成所有设置和操作。

 

[艾尔电气  全自动开关特性测试仪  产品参数] 



显示 640×480高亮TFT彩色液晶
测试系统 嵌入式工控系统
存储容量 1G电子盘;256M 内存
操作系统 Windows XPE
USB接口 标准USB2.0接口;
操作电源(选配) 操作电源外置。仪器功能专一,方便保养维护。
低电压试验 高压开关动作电压试验(俗称“低电压试验”)
适用范围 适用于所有SF6、真空、少油开关的机械特性及动作电压测量。
测试通道 4路模拟量(位移、电压、分闸电流和合闸电流);
6路开关量(I段A、B、C;II段A、B、C);
数据管理 保存200次记录。储存记录可以调出分析,并可以作为模板调用。同样类型的开关,直接调用模板,不需要重新设置配置。也可输出到各类U盘,供PC机用。
PC机后台软件 专业数据分析管理软件,可在计算机上分析、打印试验报告,使现场试验简洁化。
弹跳 弹跳次数、弹跳时间;图形显示分析。
速度   刚分、刚合速度,****速度,重合闸速度,时间-行程特性曲线。
行程 开距、超程、行程、过冲、反弹幅值;
波形显示 1.  断口I瞬时状态,(AI-t,BI-t,CI-t)曲线;
2.  断口II瞬时状态,(AII-t,BII-t,CII-t)曲线;
3.  分合闸瞬时位移,位移—时间(S-t)曲线;
4.  分合闸瞬时速度,速度—时间(V-t)曲线;
5.  分合线圈的瞬时驱动电压,电压(U-t) 曲线;
6.  分闸线圈瞬时电流,分闸电流(Io-t;)曲线;
7.  合闸线圈瞬时电流,合闸电流(Ic-t) 曲线;
试验时间设置 人性化的图形界面动作时间设置:分闸时间、合闸时间设置,
分-合-分时间设置,合-分-合时间设置。
低电压试验 支持
采样率 20 k/s、每周波400点;
A/D转换器 12位;
时间测试范围 0—5s,可以定制达100s;
时间分辨率 0.05ms;
时间测试准确度 ±0.1ms;
同期差的分辨率 0.05ms;
同期差测试准确度 ±0.05ms;
线圈电流测量量程 20A;
线圈电流分辩率 0.01A;
线圈电流测量精度 ±1.0%读数±0.05A;
****可测试速度 25m/s;
速度分辨率 0.01m/s;
速度测试准确度 ±1.0%读数±0.05 m/s;
行程测试线性范围 0~2000mm
行程最小分辨率

0.085mm

行程测试准确度 ±1.0%读数 ±0.085mm,不用校零;
测试仪显示通道数 9路:6路断口时间、1路速度、2路电流、1路电压
工作电源 AC220V;DC110、DC220V,允差-15% ,+10%
使用环境 -20℃—40℃ 湿度:≤75%RH;
外形尺寸 375mm  x  275mm  x  150mm (宽 x 深 x 高);
重量 6Kg;

[艾尔电气  全自动开关特性测试仪  产品选型] 

 

根据用户具体要求,设计相应的产品配置方案。

 

 

 

 

AL506 Circuit Breaker Tester

Implementation of standards:

DL/T 846.3-2004 

CBT-501

The Circuit Breaker Tester series is an embedded design. It is easy to use and to install sensor in field. By means of ultrasonic travel transducer patent technology, high-performance hardware system and professional analysis system, the reliability and stability of AL506 are perfect.

Ultrasonic travel transducer is small, so convenient to install, no need complex installing jig and supporter, no need the strict request that linear resistive potentiometer transducer must be paralleled to the sensor and motion direction when installed in field. So it reduces working intensity and improves working efficiency. For its excellent measuring stability and high linearity, especially the real linear all over the FSD (Full Scale Deflection), the measure precision of this instrument is much better than old type one.

The analysis and management system is professional and practical, humanism design. We can set the open or close time parameters by means of graphical interface instead of filling tables. So operation is simple and intuitive.

Operate circuit is painted on the panel, intuitive and clear, isn’t necessary to check manual.

Our products spread widely over all kinds of voltage level substations and plants in China and abroad. Batches of our products with English, Russian or French version have been supplied to the international market.

 

AL506 Characteristic Parameters

Display

640×480 high-light color LCD;

System

Embedded control system;

Storage Capability

1G Flash Card256M memory;

Operation System

Windows XPE;

Operation Style

Built-in mouse and visual key board complete all the setting and operating;
Optional key board can be plugged via USB interface if any;

USB Interface

Standard USB2.0 interface;

Coil Driving Supply

Independent external power supply (optional);

Recording Function

Professional analysis software: it can display waveform, such as contact time, current of open (close) coil, shift-time (S-t), store 100 newest records;

Travel Transducer

1. Patent technology: ultrasonic travel sensor, easy to install (standard configure);

2. Linear resistive potentiometer transducer (optional);

Sequences

C, O, C-O, O-C, O-C-O;

Low Voltage Test

Action voltage test of circuit breaker;

Application Scope

Measure all action voltage and mechanism character of circuit breaker with SF6,vaccum,or less oil;

Number of Channels

4 Analogue channels (Travel, Voltage, Opening Current and Closing Current);

6 Event channels (I section: A, B, C; II section: A, B, C) with common ground;

Parameters and Records    Management

1.       Configure test with graphical interface, or open specified record file as demo, start test with demo without repeated setting;

2.       Save the test result and all parameters to record file;

3.       100 newest records stored;

Software

Professional analysis management software “Breaker”;

Test records kept in flash card, exported to U disk, can be analyzed and printed in any PC;

Travel

Stroke, Over Travel, Travel, Rebound Amplitude

Speed

Open/ close velocity, the top velocity, reclosing velocity; 

Springing

Springing Times, Springing Time;

Waveform Display

1.  Contact Event

2.  Shift-time (S-t) curves;

3.  Instantaneous velocity of breaker mechanism travel (V-t);

4.  Coil Driving Voltage;

5.  Coil Current (open);

6.  Coil Current (close);

Sample Rate

20 k/s, 400 point per cycle;

Precision

A/D: 12 bits;

Measurement Time

0-5s;

Timing Resolution

0.05ms;

Timing Accuracy

±0.1ms;

Coil Current Measuring Range

20A during 300ms, rest time 1min;

Coil Current Measuring Resolution

0.01A;

Coil Current Measuring Accuracy

1% of the reading ±0.05A;

Velocity

25m/s (max);

Velocity Resolution

0.01m/s;

Velocity Accuracy

1% of the reading ±0.05 m/s;

Stroke Scope

02000mm (real linearity);

Travel Test Resolution

0.085mm;

Travel Test Accuracy

1% of the reading ±0.085mm (no zero adjustment needed);

Mains Voltage

AC220V;  DC110, 220V;  Tolerance -15% , +10%

Condition

Temperature: -20 to +40;  Humidity: 80%RH, non-condensing;

Physical Dimensions

370mm x270mm x140mm (Length x Width x High);

Weight

6Kg.

Ot